DGTPKANV2

MAIN FEATURES

• 20-key numeric/functional waterproof keyboard: quick entry of the set-points and the tare value.
• Highly efficient red LED display with 6 20-mm digits and 12 LEDs for showing active functions.
• Stainless steel case for panel mounting.
• Frontal panel in aluminium, with protection gasket.
• Front panel dimensions: 170 x 170mm.
• Panel cut-out: 161 x 162mm.
• Fitted with bracket for use on table or wall mounting. A/D 24-bit sigma-delta conversion, up to 400 conv./sec. auto-select.
• Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
• Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points.
• Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
• Calibration, Set-Up parameters, configurable from keyboard or from PC with DINITOOLS.
• Up to 8 signal linearisation points with DINITOOLS (3 from keypad).
• Time/Date
• From 12 Vdc to 24 Vdc power supply. EU, UK, US, AU plugs included as standard.
• Fitted with 12 V switching power adapter.

I/O SECTION

• 1 RS232/C or RS485 bi-directional port configurable for connection to PC or external units.
• 1 RS232/C bi-directional port configurable for connection to printer.
• 6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
• 4 opto-isolator photocouplers inputs: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.
• 16-bit analogue output, 4-20mA / 0-5Vdc / 0-10Vdc at choice.
• Maximum load applicable on the output current: 300Ohm. Minimum load applicable on the output voltage: 1kOhm.

Approvals:

• CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)

TRANSMITTER / INDICATOR: FUNCTIONS

• THROUGH KEYBOARD:
  – Zeroing; Semi automatic and pre-settable tare, print and/or data transmission; ON/Stand-by.
  – Quick entry of the setpoints and the tare values.
• SELECTABLE:
  – High Resolution Weighing x 10; Lb/kg conversion; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option) e Peak.
• Available in 7.15 firmware version (downloadable): Net/Gross; Weighs totalisation; Formulation; Counting; In/Out Truck weighing and Hold.
• EXTERNAL INPUT: Simulation of key pressure; Keyboard lock.
• MOSFET OUTPUT:
  – Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
• SERIAL PORTS:
  – Reading of the net, gross, and tare weights; Clearing; Semi automatic and pre-settable tare; Scale switch; Setting of outputs activation thresholds.
  – Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
  – THROUGH 16 bit ANALOGUE OUTPUT: Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

MASTER/REPEATER OPTION (MSTSLV code)

Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

FUNCTIONING MODES:

• Multi-scale repeater (MASTER):
  function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
• UNIVERSAL weight repeater:
  function which allows to repeat the weight of any scales, through the configuration of the input string.