DGTP

DGTP

“DGTP”: Panel Digital Weight Transmitter/Indicator

SKU: 6238282be123 Category:

Description

“DGTP”: Panel Digital Weight Transmitter/Indicator

Multi-purpose weight transmitter for panel mounting. Ideal as a micro-controller in industrial weighing and dosage systems, making for easier and safer integration of weighing to any automation system. 4 inputs and 6 outputs, programmable. Wide range of available interfaces.

Approvals: CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)

Additional information

ATEX

No
Display Type

RED LED
Main Functions

Programmable

Power

Comms

YES
IO

Trade

IP Rating

IP54

MAIN FEATURE

  • Easy to use 5-key waterproof keyboard.
  • Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions.
  • Case for panel mounting. Dimensions: 143,5 x 72 x 129mm (lxhxw). Panel cut-out: 136,5 x 67,5 x 140mm (lxhxw).
  • A/D 24-bit sigma-delta conversion, up to 400 conv./sec. auto-select.
  • Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Up to 8 signal linearisation points with DINITOOLS (3 from keypad).
  • Fitted real-time clock.
  • From 12 Vdc to 24 Vdc power supply.

 

I/O SECTION

  • 1 RS232/C or RS485 bi-directional port configurable for connection to PC or external units.
  • 1 RS232/C bi-directional port configurable for connection to printer.
  • 6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 4 opto-isolator photocouplers inputs: 12รท24 Vdc, 5 mA min – 20 mA max, with configurable functions.
  • Maximum load applicable on the output current: 300Ohm.
  • Minimum load applicable on the output voltage: 1kOhm.

TRANSMITTER / INDICATOR: FUNCTIONS

  • THROUGH KEYBOARD: Zeroing; Semi automatic and pre-settable tare, print and/or data transmission; ON/Stand-by.
  • SELECTABLE: High Resolution Weighing x 10; Lb/kg conversion; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option) e Peak.
  • Available in 7.15 firmware version (downloadable): Net/Gross; Weighs totalisation; Formulation; Counting; In/Out Truck weighing and Hold.
  • EXTERNAL INPUT: Simulation of key pressure; Keyboard lock.
  • MOSFET OUTPUT: Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
  • SERIAL PORTS:
    – Reading of the net, gross, and tare weights; Clearing; Semi automatic and pre-settable tare; Scale switch; Setting of outputs activation thresholds.
    – Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.

 

MASTER/REPEATER OPTION (MSTSLV code)

Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

FUNCTIONING MODES:

  • Multi-scale repeater (MASTER) – Allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
  • UNIVERSAL weight repeater – Allows to repeat the weight of any scales, through the configuration of the input string.