DGT60PB-2

DGT60PB-2

“DGT60”: DGT60PB-2 – Maxi “GOLIAH” Weight Indicator-Universal Repeater

SKU: 4b0abe6e6b95-1 Categories: ,

Description

“DGT60”: DGT60PB-2 – Maxi “GOLIAH” Weight Indicator-Universal Repeater

Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Particularly suitable for use outdoors, also in full sunlight, and where it’s necessary to view from a distance at any angle. Case completely in IP68 stainless steel.

 

Additional information

ATEX

No
Display Type

RED LED
Main Functions

Programmable

Power

Comms

YES
IO

Trade

IP Rating

IP68

MAIN FEATURES

  • Functional 5-key waterproof keypad.
  • Large 6-digit display, 60 mm high, with very efficient SMD LEDs (software adjustment of the brightness intensity), complete of 6 LEDs for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
  • IP68 stainless steel case complete of wall fixing bracket.
  • Dimensions: 410 x 67 x 165 mm.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use.
  • Max. 800.000 displayable divisions viewable with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearisation points with DINITOOLS.
  • A/D 24 bit sigma-delta 4-channel conversion, max.400 conv./sec. with automatic selection.
  • Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
  • Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
  • Power supply from 110 to 240 Vac.
  • Available as Scale or as Repeater version.
  • Fitted with an air valve for regulating the humidity and the pressure inside the indicator.

 

 

Approvals:

  • CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)

I/O SECTION

  • RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
  • RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
  • PROFIBUS serial interface.
  • 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 2 opto-isolator photocouplers: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.

 

FUNCTIONS

  • THROUGH KEYBOARD:
    – Zeroing; Semi automatic and pre-settable tare, print and/or data transmission; ON/Stand-by.
  • PROGRAM FUNCTIONS:
    – Setpoint, high resolution, peak, alibi memory, unit of measure conversion.
  • EXTERNAL INPUT:
    – Simulation of key pressure; Keyboard lock.
  • MOSFET OUTPUT:
    – Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
  • SERIAL PORTS:
    – Reading of the net, gross, and tare weights; Clearing; Semi automatic and pre-settable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.