DGT4PRONET
DGT4PRONET - Image 2
DGT4PRONET - Image 3
DGT4PRONET - Image 4

DGT4PRONET

“DGT4”: DGT4PRONET – 4-Channel Weight Transmitter + PROFINET port

Category:

Description

“DGT4”: DGT4PRONET – 4-Channel Weight Transmitter + PROFINET port

4 channel Din rail weight transmitter, with 2 IN, 2 OUT and PROFINET port. Weight transfer to PLC via fieldbus or RS485. 5-key keypad, LED display, and standard weighing programme.

It allows the reading and diagnostics of each load cell or each connected scale (up to 4).

Approvals: CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)

INTEGRATED WEB SERVER

The integrated WEB SERVER allows complete diagnostics, calibration and remote configuration of the weight transmitter from ethernet network.

 

FUNCTIONS AND DATA AVAILABLE VIA FIELDBUS

  • NET, GROSS and TARE weight
  • DIGITAL INPUTS status
  • RELAY OUTPUTS status
  • SETPOINT setting
  • Alibi memory writing and reading (optional)
  • Weight status (e.g., positive, negative, stable, unstable)
    – Error conditions (e.g., overload, underload)
    – Calibration
  • SETUP configuration
  • Diagnostics of each converter channel

MAIN FEATURES

  • Power supply: 12-24Vdc
  • Converter: A/D 24 bit with 4 channel
  • Max scale number: 4
  • Load cells connection: with 4 or 6 wires (with sense)
  • Operating modes:
    – Digital junction box
    – Multi-scale transmitter
  • Conversion rate: up to 3200 conv./sec
  • Selectable sampling rate: up to 400 conv./sec
  • Displaying: up to 800.000d
  • Signal sensitivity: 0,03 µV/d (0,03 µV/e)
  • Resolution: 3.000.000 points
  • Linearisation: up to 8 points
  • Connectable load cells: up to 8 350 Ω cells
  • Serial ports:
    – 1 RS232 for configuration from PC with “Dinitools®”

 

  • Digital outputs: n. 2 configurable OUTPUTS
  • Digital inputs: n. 2 configurable INPUTS
  • Available in 7.15 firmware version downloadable:
    – Net/Gross; Weight totalisation; Formulation; Counting; In/Out Truck weighing and Hold.
  • Keyboard: mechanical with 5 digits
  • Keyboard functions:
    – Zeroing, Tare, Function mode, Manual data printing/sending, On/Stand-by
  • Program functions:
    – Setpoint, High resolution, Peak, Alibi Memory, Unit of measure conversion
  • Display: 13mm red LED
  • Calibration:
    – Theoretical (mV\V)
    – With sample weights
    – Remotely by WEB SERVER
    – From the keyboard
    – From PC with “Dinitools”
  • Case: ABS, for Din bar (106 x 90 x 58 mm)