DGT20IPW

MAIN FEATURES

• Easy to use 5-key waterproof keyboard.
• Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions.
• New AISI304 stainless steel multi-function protective case, which allows:
  – Wall or bench installation via standard swivel bracket
  – Panel installation with IP68 degree of protection both front and rear, ideal for the chemical, pharmaceutical and food industry and harsh environments.
  – Easy cabling, inspection and maintenance with front panel removal system.
• IP68 degree of protection, with both bench and panel installation.
• Dimensions 212 x 169,5 x 91mm, fitted with support bracket for table or wall mounting.
• Theoretical calibration.
• Up to 8 signal linearisation points with DINITOOLS (3 from keypad).
• Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
• Up to 10.000e OIML or 2 x 3000e @ 0,3 µV/e CE-M legal for trade.
• Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points.
• A/D 24-bit sigma-delta conversion, up to 400 conv./sec. auto-select.
• Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
• Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
• Internal power unit 110/230Vac.

TRANSMITTER / INDICATOR: FUNCTIONS

• THROUGH KEYBOARD:
  Zeroing; Semi automatic and pre-settable tare, print and/or data transmission; ON/Stand-by.
• SELECTABLE:
  High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Counting; In/Out Truck weighing; Hold e Peak.
• EXTERNAL INPUT:
  Simulation of key pressure; Keyboard lock.
• MOSFET OUTPUT:
  Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
• SERIAL PORTS:
  – Reading of the net, gross, and tare weights; Clearing; Semi automatic and pre-settable tare; Scale switch; Setting of outputs activation thresholds.

MASTER/REPEATER OPTION (MSTSLV code )

A specific programme for using the indicator as a universal or multi-scale weight repeater (MASTER) in combination with DFW/DGT/MCW.

OPERATING MODES:

• Multi-scale repeater (MASTER):
  mode that allows up to 32 independent scales to be repeated, with the ability to manage their functions, or to display and print the sum of the weights of all the scales.
• UNIVERSAL weight repeater:
  mode that allows weight repetition of any scale, by configuring the input string.

I/O SECTION

• RS232/C bi-directional port (RJ11 connector) configurable for connection to external units.
• RS485 bi-directional port configurable for network connection.
• 2 photomosphet outputs 150 mA 48 Vac/150 mA 60 Vdc (NO) with configurable functions.
• 2 inputs (opto-isolator photocouplers) 12 ÷ 24 Vdc, 5 mA min – 20 mA max, with configurable functions.

Approvals:

• CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)