DGT20AN
DGT20AN - Image 2

DGT20AN

“DGT20”: DGT20AN – Bench Digital Weight Transmitter/Indicator, Analogue Output

SKU: 6f128e358ef6-1 Category:

Description

“DGT20”: DGT20AN – Bench Digital Weight Transmitter/Indicator, Analogue Output

Multi-purpose weight transmitter ideal for the production of bench or floor scales, dosage, filling systems etc. The wide range of available interfaces, makes it easy to integrate the weighing with any automation system.
Integrated WebServer as standard

Additional information

ATEX

No
Display Type

RED LED
Main Functions

Programmable

Power

Comms

YES
IO

Trade

IP Rating

IP54

MAIN FEATURES

  • Easy to use 5-key waterproof keyboard.
  • Highly efficient red LED display with 6 20-mm digits and 6 LEDs for showing active functions.
  • Stainless steel protective case.
  • Frontal panel in aluminium, with protection gasket.
  • Dimensions 170 x 115 x 68mm, fitted with support bracket (168 x 150mm) for table or wall mounting.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Up to 10.000e or multi-range 2 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use.
  • Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearisation points with DINITOOLS (3 from keypad).
  • A/D 24-bit sigma-delta conversion, up to 400 conv./sec. auto-select.
  • Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
  • Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
  • From 12 Vdc to 24 Vdc power supply; 12Vdc power adapter included. EU, UK, US, AU plugs included as standard.

MASTER/REPEATER OPTION (MSTSLV code)

Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.
FUNCTIONING MODES:
  • Multi-scale repeater (MASTER)
    function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
  • UNIVERSAL weight repeater
    function which allows to repeat the weight of any scales, through the configuration of the input string.

TRANSMITTER / INDICATOR: FUNCTIONS

  • THROUGH KEYBOARD:
    – Zeroing; Semi automatic and pre-settable tare, print and/or data transmission; ON/Stand-by.
  • SELECTABLE:
    – High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weight totalisation; Formulation; Counting; In/Out Truck weighing; Hold e Peak.
  • EXTERNAL INPUT:
    – Simulation of key pressure; Keyboard lock.
  • MOSFET OUTPUT:
    – Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
  • SERIAL PORTS:
    – Reading of the net, gross, and tare weights; Clearing; Semi automatic and pre-settable tare; Scale switch; Setting of outputs activation thresholds.
    – Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
    – THROUGH 16 bit ANALOGUE OUTPUT: Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

Approvals:

  • CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)