DGT100BC-1
DGT100BC-1 - Image 2
DGT100BC-1 - Image 3

DGT100BC-1

“DGT100”: DGT100BC-1 – Maxi Weight Indicator – Universal Repeater

SKU: 5322327d61db Categories: ,

Description

“DGT100”: DGT100BC-1 – Maxi Weight Indicator

Weight indicator/ repeater with large matrix display composed of very intense bright LEDs. Particularly suitable for outdoor uses, it is clearly visible even in full sunlight and where it’s necessary to view from a distance at any angle. Case completely in IP68 stainless steel.

Additional information

ATEX

No
Display Type

RED LED
Main Functions

Programmable

Power

Comms

YES
IO

Trade

IP Rating

IP68

MAIN FEATURES

  • Functional 5-key waterproof keypad.
  • Large 6-digit display, 100 mm high, with very efficient SMD LEDs, complete of 6 LEDs for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
  • Software adjustment of the brightness intensity by keyboard.
  • AISI 304 stainless steel case with IP68 protection complete of wall fixing bracket.
  • Fitted with an anti-condensation air valve for regulating the humidity and the pressure inside the indicator.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Max. 10.000e or multi-range 2 x 3000e @ 0,3 µV/e in CE-M approved version for legal for trade use.Max. 800.000 displayable divisions viewable with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearisation points with DINITOOLS.
  • A/D 24 bit sigma-delta 4-channel conversion, max.400 conv./sec. with automatic selection.
  • Connectable with up to 8 analogue load cells with 350 Ohm input resistance.
  • Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
  • Power supply from 110 to 240 Vac.
  • Available as Scale or as Repeater version.

 

I/O SECTION

  • RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
  • RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
  • 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 2 opto-isolator photocouplers: 12÷24 Vdc, 5 mA min – 20 mA max, with configurable functions.

DGT100BC / DGT100AN / DGT100PB FUNCTIONS

  • THROUGH KEYBOARD:
    – Zeroing; Semi automatic and pre-settable tare, print and/or data transmission; ON/Stand-by.
  • PROGRAM FUNCTIONS:
    – Setpoint, high resolution, peak, alibi memory, unit of measure conversion.
  • EXTERNAL INPUT:
    – Simulation of key pressure; Keyboard lock.
  • MOSFET OUTPUT:
    – Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
  • SERIAL PORTS:
    – Reading of the net, gross, and tare weights; Clearing; Semi automatic and pre-settable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
    – Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.

 

Approvals:

  • EU Type Examination Certificate (2014/31/EU), OIML R-76, OIML R-61 (MID), OIML R-51 (MID)