DGTPKPBV2-1
DGTPKPBV2-1 - Image 2

DGTPKPBV2-1

“DGTPK”: DGTPKPBV2-1 – Digital Weight Transmitter/Indicator, Extended Keyboard, Profibus

SKU: 558c7ad2208e-1-1 Category:

Description

“DGTPK”: DGTPKPBV2-1 – Digital Weight Transmitter/Indicator, Extended Keyboard, Profibus

Multi-function weight transmitter for table or panel mounting. Ideal as a micro-controller in industrial weighing and dosage systems, making for easier and safer integration of weighing into any automation system. Fitted with 4 inputs and 6 outputs, programmable. Numerical keyboard for the quick entry of the set-point and the tare.

Additional information

ATEX

No
Display Type

RED LED
Main Functions

Programmable

Power

Comms

YES
IO

Trade

IP Rating

IP54

MAIN FEATURES

  • 20-key numeric/functional waterproof keyboard: quick entry of the set-points and the tare value.
  • Highly efficient red LED display with 6 20-mm digits and 12 LEDs for showing active functions.
  • Stainless steel case for panel mounting.
  • Frontal panel in aluminium, with protection gasket.
  • Front panel dimensions: 170 x 170mm.
  • Panel cut-out: 161 x 162mm.
  • Fitted with bracket for use on table or wall mounting. A/D 24-bit sigma-delta conversion, up to 400 conv./sec. auto-select.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points.
  • Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINITOOLS.
  • Up to 8 signal linearisation points with DINITOOLS (3 from keypad).
  • Time/Date
  • From 12 Vdc to 24 Vdc power supply. EU, UK, US, AU plugs included as standard.
  • Fitted with 12 V switching power adapter.

 

I/O SECTION

  • 1 RS232/C or RS485 bi-directional port configurable for connection to PC or external units.
  • 1 RS232/C bi-directional port configurable for connection to printer.
  • PROFIBUS serial interface.
  • 6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 4 opto-isolator photocouplers inputs: 12รท24 Vdc, 5 mA min – 20 mA max, with configurable functions.
  • Maximum load applicable on the output current: 300Ohm. Minimum load applicable on the output voltage: 1kOhm.

 

Approvals:

  • CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)

TRANSMITTER / INDICATOR: FUNCTIONS

  • THROUGH KEYBOARD:
    – Zeroing; Semi automatic and pre-settable tare, print and/or data transmission; ON/Stand-by.
    – Quick entry of the setpoints and the tare values.
  • SELECTABLE:
    – High Resolution Weighing x 10; Lb/kg conversion; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option) e Peak.
  • Available in 7.15 firmware version (downloadable): Net/Gross; Weighs totalisation; Formulation; Counting; In/Out Truck weighing and Hold.
  • EXTERNAL INPUT: Simulation of key pressure; Keyboard lock.
  • MOSFET OUTPUT:
    – Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
  • SERIAL PORTS:
    – Reading of the net, gross, and tare weights; Clearing; Semi automatic and pre-settable tare; Scale switch; Setting of outputs activation thresholds.

 

MASTER/REPEATER OPTION (MSTSLV code)

Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

FUNCTIONING MODES:

  • Multi-scale repeater (MASTER):
    function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
  • UNIVERSAL weight repeater:
    function which allows to repeat the weight of any scales, through the configuration of the input string.