DGT4MODTCP
DGT4MODTCP - Image 2
DGT4MODTCP - Image 3
DGT4MODTCP - Image 4

DGT4MODTCP

“DGT4”: DGT4MODTCP – 4-Channel Weight Transmitter + MODBUS TCP/IP port

Category:

Description

“DGT4”: DGT4MODTCP – 4-Channel Weight Transmitter + MODBUS TCP/IP port

Transmitter for DIN bar with 4 channels, 2 IN, 2 OUT and MODBUS TCP/IP port. 5-key keypad, LED display, and standard weighing programme. Weight transfer to PLC via fieldbus or RS485.

It allows the reading and diagnostics of each load cell or each connected scale (up to 4).

Approvals: CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID)

INTEGRATED WEB SERVER

The integrated WEB SERVER allows complete diagnostics, calibration and remote configuration of the weight transmitter from ethernet network.

FUNCTIONS AND DATA AVAILABLE VIA FIELDBUS

  • NET, GROSS and TARE weight
  • DIGITAL INPUTS status
  • RELAY OUTPUTS status
  • SETPOINT setting
  • Alibi memory writing and reading (optional)
  • Weight status (e.g., positive, negative, stable, unstable)
    – Error conditions (e.g., overload, underload)
    – Calibration
  • SETUP configuration
  • Diagnostics of each converter channel

MAIN FEATURES

  • Power supply: 12-24Vdc
  • Converter: A/D 24 bit with 4 channel
  • Max scale number: 4
  • Load cells connection: with 4 or 6 wires (with sense)
  • Operating modes:
    – Digital junction box
    – Multi-scale transmitter
  • Conversion rate: up to 3200 conv./sec
  • Selectable sampling rate: up to 400 conv./sec
  • Displaying: up to 800.000d
  • Signal sensitivity: 0,03 µV/d (0,03 µV/e)
  • Resolution: 3.000.000 points
  • Linearisation: up to 8 points
  • Connectable load cells: up to 8 350 Ω cells
  • Serial ports:
    – 1 RS232 for configuration from PC with “Dinitools®”

 

  • Digital outputs: n. 2 configurable OUTPUTS
  • Digital inputs: n. 2 configurable INPUTS
  • Available in 7.15 firmware version downloadable:
    – Net/Gross; Weight totalisation; Formulation; Counting; In/Out Truck weighing and Hold.
  • Keyboard: mechanical with 5 digits
  • Keyboard functions:
    – Zeroing, Tare, Function mode, Manual data printing/sending, On/Stand-by
  • Program functions:
    – Setpoint, High resolution, Peak, Alibi Memory, Unit of measure conversion
  • Display: 13mm red LED
  • Calibration:
    – Theoretical (mV\V)
    – With sample weights
    – Remotely by WEB SERVER
    – From the keyboard
    – From PC with “Dinitools”
  • Case: ABS, for Din bar (106 x 90 x 58 mm)